[ VISION HYDRAULICS ]

[VH]

[VH - LOGO]

.

v i s i o n h y d r a u l i c s . c o m

- P  r  o  d u c t s - Hydraulics Hose Fittings - American

.

Home . Profile . Services . Enquiry Form . Feedback . Contact Us . Tips

\/

Products

AMERICAN STANDARD ( NPT, SAE, JIC )

.

. Hydraulic Hoses

.

\/ Hydraulic Hose Fittings

Visionflex Hose Assemblies are available with a whole range of end connections to American standards depending on end use. The most popular fittings and covered here in case if end connections other than the ones indicated in the American range presented are needed, please give full details in the Enquiry form for immediate response.

.

British Standard

.

American Standards

.

Metric (DIN)

.

French & Japanese Standards

[VH -  HYDRAULIC HOSE FITTINGS ]

.

. S. S Hoses
. . Hydraulic Compression Fittings
. . Quick Release Couplings
. . Valves
. . Pipe Clamps
1)

JIC SOLID MALE 37

[VH - JIC SOLID MALE 37]

The Society of Automotive Engineers (SAE) employs the use of a 37 flare or seat for high pressure jointing to JIC Standards. The seating is by line contact established during fitment.

HOSE SIZE 1/4" ID HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE
1 1/4" ID
HOSE SIZE
1 1/2" ID
HOSE SIZE 2" ID
. 7/16''- 29

1/2''- 20

9/16''- 18

3/4''- 16 7/8''- 14 1 1/16''- 12 1 5/16''- 12 1 5/8''- 12 1 7/8''- 12 2 1/2''- 12
.

1/2''- 20

9/16''- 18

3/4''- 16

7/8''- 14 1 1/16''- 12 1 3/16''- 12 1 5/8''- 12 1 7/8''- 12 - -
.

9/16''- 18

-

- 1 1/16''- 12 - 1 5/16''- 12 - - - -
2)

JIC FEMALE SWIVEL (37 SEAT)

[VH - JIC FEMALE SWIVEL (37 SEAT) ]  amr_fem90.jpg (3996 bytes)  amr_fem45.jpg (3917 bytes)

 

The JIC female has straight threads and a 37 flare seat and is quite common among American fittings. The 45 flare fittings used for low pressure applications are almost similar, except for the seat angles. Customers are advised to measure seating angles, to avoid interchange, resulting in leakages.

HOSE SIZE 1/4" ID HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE 1 1/4" ID HOSE SIZE 1 1/2" ID HOSE SIZE 2" ID
. 7/16''- 29 1/2''- 20 9/16''- 18 3/4''- 16 7/8''- 14 7/8''- 14 1 5/16''- 12 1 5/8''- 12 1 7/8''- 12 2 1/2''- 12
. 1/2''- 20 9/16''- 18 3/4''- 16 7/8''- 14 1 1/16''- 12 1 1/16''- 12 1 5/8''- 12 1 7/8''- 12 - -
. 9/16''- 18 - - 1 1/16''- 12 - 1 3/16''- 12 - - - -
. - - - - - 1 5/16''- 12 - - - -

3)

NPTF SOLID MALE 60 SEAT

[VH - NPTF SOLID MALE 60 SEAT]

Although this type is not recommended by National Power Fluid Association (NPFA) for use in hydraulics, the same is still popularly used. The Seat takes place by deformation of threads.

HOSE SIZE 1/4" ID HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE 1 1/4" ID HOSE SIZE 1 1/2" ID HOSE SIZE 2" ID
. 1/8''- 18 1/4''- 18 1/4''- 18 3/8''- 18 3/4''- 14 3/4''- 14 1''- 11 1/2 1 1/4''- 11 1/2 1 1/2''- 11 1/2 2''- 11 1/2
. 1/4''- 18 3/8''- 18 3/8''- 18 1/2''- 14 - 1''- 11 1/2 1 1/4''- 11 1/2 1 1/2''- 11 1/2 2''- 11 1/2 -
. 3/8''- 18 - 1/2''- 14 3/4''- 14 - - - - - -

4)

ORFS FEMALE

[VH - ORFS FEMALE]  amr_orfs90.jpg (3835 bytes)  amr_orfs45.jpg (3679 bytes)

 

These fittings find extensive use in mobile hydraulics and is relatively reliable. The fittings employs a straight thread and a rubber 'o' ring, on the mating component, to provide a leak proof connection.

HOSE SIZE 1/4" ID HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE 1 1/4" ID HOSE SIZE 1 1/2" ID HOSE SIZE 2" ID
. 9/16''- 18 11/16''- 16 1 1/16''- 16 1 3/16''- 16 1''- 14 1 3/16''- 12 1 7/16''- 12 1 11/16''- 12 2''- 11 -
. 11/16''- 16 - 1 3/16''- 16 1''- 14 - 1 3/16''- 12 - - - -

5)

SAE FLANGE CODE 61 - 3000 PSI
[VH - SAE FLANGE CODE 61 - 3000 PSI]    amr_sae90.jpg (3997 bytes)    amr_sae45.jpg (3682 bytes)

 

SAE flange fittings are mainly used for critical applications, (Industrial and Mobile). The flange head is provided with an 'o' ring groove and is held in place, by split or Rectangular Flanges. The selection of the type of Flange is as per the rating. Code 61 Flanges are rated for 3000 PSI (210 bar). These fittings are also available in 45 or 90 tubular bends.

HOSE SIZE 1/4" ID

HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE 1 1/4" ID HOSE SIZE 1 1/2" ID HOSE SIZE 2" ID
. - - - 1/2''(30.2) - 3/4''(38.1) 1''(44.5) 1 1/4''(50.8) 1 1/2''(60.3) 2''(71.4)
. - - - 3/4''(38.1) - 1''(44.5) 1 1/4''(50.8) 1 1/2''(60.3) 2''(71.4) -

6)

SAE FLANGE CODE 62 - 6000 PSI

[VH - SAE FLANGE CODE 62 - 6000 PSI]    amr62_90.jpg (3869 bytes)     amr62_45.jpg (3636 bytes)

The Principle of the Code 62 flanges is the same as that of code 61, except for the working pressure, which is 6000 PSI.

HOSE SIZE 1/4" ID HOSE SIZE 5/16" ID HOSE SIZE 3/8" ID HOSE SIZE 1/2" ID HOSE SIZE 5/8" ID HOSE SIZE 3/4" ID HOSE SIZE 1" ID HOSE SIZE 1 1/4" ID HOSE SIZE 1 1/2" ID HOSE SIZE 2" ID
. - - - 1/2''(31.8) - 3/4''(41.3) 1''(47.6) 1 1/4''(54) 1 1/2'' - (63.5) 2''- (79.4)
. - - - 3/4''(41.3) - 1''- (47.6) 1 1/4'' (54) 1 1/2'' - (63.5) 2''- (79.4) -

Top

.

-- WE HANDLE PRESSURE WITH PLEASURE --